Product ID:ELMERS SAF-T CONTACT CEMENT, E810
MSDS Date:04/29/1991
FSC:8040
NIIN:00N025410
MSDS Number: BMPNC

Emergency Phone: 614-431-6600

Info Phone: 800-848-9400; 614-431-6680

Cage: 86142

Telephone: 614-225-6124

Cage: 86142

NON HAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN ABSORPTION/INGEST: NOT TOXIC WHEN
TESTED AS DESCRIBED IN 16 CFR PART 1500.3 (C) (1) AND (2). INHAL:
NOT EXPECTED TO BE HARMFUL UNDER NORMAL CNDTNS OF USE. HOWEVER, IF
ALLOWED TO BECOME AIRBORNE, MAY CAUSE IRRIT OF NOSE/THROAT/LUNGS.
SKIN/EYES: NOT AN IRRITANT WHEN TESTED AS DESCRIBED IN 16 CFR PART
1500.41/42.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: IF ACCIDENTLY SWALLOWED, DILUTE BY DRINKING LARGE
QUANTITIES OF WATER. IMMEDIATELY CONTACT POIS CTL CTR OR HOSPITAL
EMER ROOM FOR ANY OTHER ADDL TREATMENT DIRECTIONS. INHAL: REMOVE TO
FRESH AI R. EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER. CALL MD IF
IRRIT PERSISTS. SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER SHOULD BE USED TO KEEP FIRE-EXPOSED
CONTAINERS COOL.
Unusual Fire/Explosion Hazard:WILL NOT BURN UNLESS WATER HAS
EVAPORATED.

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
A CHEMICAL DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN COOL/DRY
PLACE. KEEP CONTRS TIGHTLY CLOSED. AVOID PRLNG/RPTD BRTHG OF VAPOR.
HANDLE I/A/W GOOD INDUS HYGIENE/SFTY PRAC.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:IF AIRBORNE CONTAM ARE GENERATED WHEN MATL IS
HEATED/HANDLED, SUFFICIENT VENT IN VOLUME & AIR FLOW PATTERNS (SUPP
DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: SHOULD BE PROVIDED TO KEEP AIR CONTAMINANT CONCENTRATION LEVELS
BELOW ACCEPTABLE CRITERIA.

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17.5 @ 20C
Vapor Density:<1
Spec Gravity:1.1
pH:6
Evaporation Rate & Reference:<1 (BUTYL ACETATE = 1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:WHITE MILKY LIQUID, ACRYLIC AROMA.
Percent Volatiles by Volume:50

Stability Indicator/Materials to Avoid:YES
NONE KNOWN TO MANUFACTURER.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA
704-12(4-3.1).
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE/PROVINCIAL, AND FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.